Selection and working principle of purchase of industrial grinding dust collector

التعليقات · 54 الآراء

purchase of industrial grinding dust collector https://www.kaisenfilter.com/KSDM-3-0-Downdraft-Grinding-Dust-Collector.html

I. Overview

The purchase of industrial grinding dust collector has the following characteristics:

1, the vertical filter cylinder structure, easy to dust adsorption and dust removal; And because of the smaller jitter in the cleaning filter material, the life of the filter cylinder is much higher than that of the filter bag, and the maintenance cost is low.

2, using the current advanced off-line three states (filtration, cleaning, static) cleaning way, avoid the "re-adsorption" phenomenon when cleaning, so that cleaning the most reliable.

3, the design of a pre-collection mechanism, not only to overcome the dust directly scour the shortcomings of easy wear filter cylinder, and can greatly improve the dust concentration at the entrance of the dust collector.

4, the key components that affect the main performance (such as pulse valve) adopt imported parts, the service life of the vulnerable parts diaphragm is more than 1 million times.

5, the use of separate spray cleaning technology, a pulse valve can be sprayed at the same time a column (each column of the maximum number of filter cylinder 12), can greatly reduce the number of pulse valves.

6, pulse valve three state clearance mechanism adopts automatic control, and both timing or manual two control modes.

7, according to the installation space needs to use different column number, the number of rows of the filter cylinder arbitrary combination; The unit filtering area occupies a small three-dimensional space, can save a lot of space resources for users, and indirectly reduce the one-time investment cost of users.

8, long service life, the service life of the filter cylinder can be up to 2 ~ 3 years, greatly reducing the dust collector to replace the filter element times (the traditional bag dust collector on average every 6 months or so to replace the filter element), simple maintenance, greatly reducing the user in the use of maintenance costs.

Two, the purchase of industrial grinding dust collector structure and working principle

1. Structure: The purchase of industrial grinding dust collector consists of six parts: upper box, ash bucket, ladder platform, bracket, pulse dust cleaning and ash removal device.

2 Working Principle

Under the action of the main fan of the system, the dusty gas enters the air box at the bottom of the dust collector from the air inlet at the bottom of the dust collector for the pre-treatment of the dusty gas, and then enters the dust room of the upper box from the bottom. Dust is adsorbed on the outer surface of the filter cylinder, and the filtered clean gas enters the clean air chamber of the upper box through the filter cylinder and is collected to the outlet for discharge.

purchase of industrial grinding dust collector https://www.kaisenfilter.com/KSDM-3-0-Downdraft-Grinding-Dust-Collector.html

التعليقات